- 您现在的位置：买卖IC网 > Sheet目录980 > G6L-1P DC12 (Omron Electronics Inc-EMC Div)RELAY TELECOM SPST 1A 12V
Precautions
■ Correct Use
Long-term Continuously ON Contacts
Using the Relay in a circuit where the Relay will be ON continuously
for long periods (without switching) can lead to unstable contacts
because the heat generated by the coil itself will affect the insulation,
causing a film to develop on the contact surfaces. Be sure to use a
fail-safe circuit design that provides protection against contact failure
or coil burnout.
Handling
Leave the Relays packed until just prior to mounting them.
Soldering
Solder: JIS Z3282, H63A
Soldering temperature: Approx. 250 ° C (At 260oC if the DWS method
is used.)
Soldering time: Approx. 5 s max. (approx. 2 s for the first time and
approx. 3 s for the second time if the DWS method is used.)
Be sure to adjust the level of the molten solder so that the solder will
not overflow onto the PCB.
Claw Securing Force During Automatic
Insertion
During automatic insertion of Relays, make sure to set the securing
force of the claws to the following values so that the Relay character-
istics will be maintained.
Maximum Voltage
The maximum voltage of the coil can be obtained from the coil tem-
perature increase and the heat-resisting temperature of coil insulat-
ing sheath material. (Exceeding the heat-resisting temperature may
result in burning or short-circuiting). The maximum voltage also
involves important restrictions which include the following:
? Must not cause thermal changes in or deterioration of the insulating
material.
? Must not cause damage to other control devices.
? Must not cause any harmful effect on people.
? Must not cause fire.
Therefore, be sure not to exceed the maximum voltage specified in
the catalog.
As a rule, the rated voltage must be applied to the coil. A voltage
exceeding the rated value, however, can be applied to the coil pro-
vided that the voltage is less than the maximum voltage. It must be
noted that continuous voltage application to the coil will cause a coil
temperature increase thus affecting characteristics such as electrical
life and resulting in the deterioration of coil insulation.
Coating
Relays mounted on PCBs may be coated or washed. Do not apply
silicone coating or detergent containing silicone, otherwise the sili-
cone coating or detergent may remain on the surface of the Relays.
Coil Power Supply Waveform
A
C
B
If the voltage applied to the coil is increased or decreased gradually,
operating characteristics may be unstable, contact endurance may
decline, or the Relay may not function at its full performance level.
Therefore, always use an instantaneous ON and instantaneous OFF
when applying the voltage. Be sure that the rated voltage or zero
voltage is reached within 1 ms.
Direction A: 5.0 N max.
Direction B: 5.0 N max.
Direction C: 5.0 N max.
Secure the claws to the area indicated by shading.
Do not attach them to the center area or to only part of the
Relay.
Environmental Conditions During Operation,
Storage, and Transportation
Protect the Relays from direct sunlight and keep the Relays under
normal temperature, humidity, and pressure.
38
Low Signal Relay
G6L
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
G6M-1A DC24
RELAY GEN PURPOSE SPST 3A 24V
G6RL-1 DC24
RELAY GEN PURPOSE SPDT 8A 24V
G6RL-1 DC48
RELAY GEN PURPOSE SPDT 8A 48V
G6RN-1 DC18
RELAY GEN PURPOSE SPDT 8A 18V
G6S-2F-3 DC4.5
RELAY TELECOM DPDT 2A 4.5V
G6WU-1P DC9
RELAY RF SPDT 10MA 9V
G6Y-1 DC9
RELAY RF SPDT 10MA 9V
G6ZK-1F-TR DC5
RELAY RF SPDT 10MA 5V
相关代理商/技术参数
G6L-1P DC24
制造商:Omron Electronic Components LLC 功能描述:Electromechanical Relay SPST-NO 1A 24VDC 2.504KOhm Through Hole
G6L-1P DC3
制造商:OMRON Electronic Components LLC 功能描述:RELAY TELECOM SPST 1A 3V LOW SWIGNAL RELAY
G6L-1P DC4.5
制造商:Omron Electronic Components LLC 功能描述:Electromechanical Relay SPST-NO 1A 4.5VDC 112.5Ohm Through Hole
G6L-1P DC5
功能描述:RELAY TELECOM SPST 1A 5V RoHS:是 类别:继电器 >> 信号，高达 2 A 系列:G6L 产品目录绘图:8000 Series
8000 Series Footprint
8002, 8L02, 8L61 Circuit 标准包装:25 系列:8L 继电器类型:舌簧 线圈类型:无锁存 线圈电流:12mA 线圈电压:24VDC 触点形式:DPST（2 A 型） 触点额定值（电流）:500mA 切换电压:200VAC，200VDC - 最小值 关闭电压（最大）:19.2 VDC 关闭电压（最小）:2 VDC 特点:二极管，带静电屏蔽 安装类型:通孔 端接类型:PC 引脚 包装:管件 触点材料:- 操作时间:0.5ms 释放时间:1ms 线圈功率:- 线圈电阻:2 千欧 工作温度:-20°C ~ 85°C 产品目录页面:2577 (CN2011-ZH PDF) 其它名称:306-1042
G6L1P12DC
制造商:Omron Electronic Components LLC 功能描述:RELAY LOW THT SPST-NO 1A 制造商:Omron Electronic Components LLC 功能描述:RELAY, LOW, THT, SPST-NO, 1A, 12V
G6L-1P12DC
制造商:Omron Electronic Components LLC 功能描述:G6L-1P SPST-NO flat signal relay,12Vdc
G6L1P24DC
制造商:Omron Electronic Components LLC 功能描述:RELAY LOW THT SPST-NO 1A
G6L-1P24DC
制造商:Omron Electronic Components LLC 功能描述:G6L-1P SPST-NO flat signal relay,24Vdc